1. i600 package
- The main package
- Accessory package
2. i600 components
| Appearance | Item (Model Name) | Qty |
| i600 Handpiece | 1 | |
| Power Hub | 1 | |
| i600 Handpiece Cover | 1 | |
| Reusable Tip | 4 | |
| Calibration Tool | 1 | |
| Practice Model | 1 | |
| Wrist Strap | 1 | |
| Desktop Cradle | 1 | |
| Wall Mount Holder | 1 | |
| Power Delivery Cable | 1 | |
| USB 3.0 Cable | 1 | |
| Medical Adapter | 1 | |
| Power Cord | 1 | |
|
USB Flash Drive (Installer of Medit Scan for Clinics included) |
1 | |
| User Guide | 1 | |
|
Packaging Composition and Weight 1. Paper: 2,315g (Carton / package box) 2. Vinyl Plastic: 143g (Aircell / sponge) | ||
Additional Components (Sold Separately)
| Appearance | Item (Model Name) | Qty |
| Reusable Tip (Small) | 4 |
⚠️ Caution
The content of this page is intended as general reference information for global audiences.
Approval scope, components, usage environment, installation conditions, and provided offerings may vary by country.
For the Japanese market, please refer to the latest Japanese-language Instructions for Use (IFU) and User Guide as the primary sources.
In the event of any discrepancy between this page and the official documentation for Japan, the official documentation for Japan shall take precedence.
For the latest detailed specifications and sales configurations, please refer to the documents included at the time of purchase, and contact your distributor or service center if necessary.
3. Setting up the i600 device
Minimum system requirements for Medit Plug &Scan
USB Type-C / USB Power Delivery supporting 5V, 3A output (formally known as USB Type-C 3.1, 3.2, or Thunderbolt, etc.)
Depending on the PC manufacturer, the output conditions of the ports may not be satisfied, and Plug & Scan may not operate properly. If so, connect it to an externally Power hub.
For more details, refer to the link below.
What are the specifications of the compatible USB-C port?
Standard Connection using power hub
(1) Connect the USB C cable to the Power Hub.
(2) Connect the Medical Adapter to the Power Hub.
(3) Connect Power Cord to the Medical Adapter.
(4) Connect the Power Cord to a power source.
(5) Connect the USB C cable to the PC.
💡 Turning on the i600
1. Press the power button on the i600.
2. Wait until the USB connection indicator turns blue.
💡 To turn off the i600, press and hold the power button of the i600 for 3 seconds.
💡 Placing on the Desktop Cradle
💡 Installation of Wall Mount Holder
Comments
0 comments
Please sign in to leave a comment.