Requirements
Medit Link 3.1.4 or newer
Dentrix G7.3 or newer
Dentrix Smart Image 31.0 or newer
Medit Link and Dentrix must be installed on the same PC
Installing the “Medit Connector” in Dentrix
1. Run the “Dentrix Smart Image Medit Connector Setup.exe” installer.
The Dentrix Smart Image Connector installers can be found at:
C:\DENTRIX\Common\Smart Image\Installers
2. On the Welcome screen, click Next.
3. Choose the location and click Install.
4. Once the installation is complete, click Next.
5. To complete the installation, click Finish.
Running the Integration
1. Open the Dentrix Patient Chart and select a patient.
2. Click “Acquire 2D/3D or CAD/CAM Image” on the toolbar.
3. On the left side of the window, choose CAD/CAM in the preset options.
4. Select Medit as the Imaging Software option and click Acquire Now
5. This opens Medit Link, which bridges the patient information and automatically creates a case for the patient in the Medit Link.