📖 [Crown Fit] User interface

User Interface at a Glance

Title Bar

The Title Bar is the ribbon at the top of the application window that contains basic controls on the right and the program menu on the left. It also shows the app name.

	Menu	Manage the opened project, access available assistance resources (user guide, tutorial page, help center), and check app details and settings.
	Help Center	Go to the Medit Help Center page dedicated to this app.
	Select Video Record Area	Specify which area shall be captured for video recording.
	Start/Stop Video Recording	Start and stop the video recording of the screen.
	Screenshot	Take a screenshot. Capture the app with or without the title bar using automatic selection, or click and drag to capture only the desired area.
	Screenshot Manager	View, export, or delete the screenshots. Upon completion, all captured images will be saved to the case automatically.
	Minimize	Minimize the application window.
	Restore	Maximize or restore the application window.
	Exit	Close the application.

Data Tree

The Data Tree is located on the left side of the screen, showing the data you use for the current project in groups. You can control each data visibility by clicking its icon in the tree or change its transparency by moving its slider.

Right-click the data or data group to see the context menu for more data control.

Action Control Buttons

There are two buttons for action control - Undo and Redo. Both are located in the bottom left corner of the application window.

	Undo	Undo the previous action.
	Redo	Redo the previous action.

Toolboxes

The Toolbox of each step provides features necessary for completing the primary goal of that step. Below are the explanations for the features provided in each Toolbox across the entire app.

Overview

	Import Medit Link Files	Import 3D files from Medit Link.
	Import Local Files	Import local files saved on your computer.
	Import exocad/3Shape Folder	Import an exocad or 3Shape folder.
	Delete Data	Select data to be deleted.

Crown Alignment

	Reassign Data	Change the assignment for prepared teeth, CAD, and milled prosthesis data.
	Align Crown Data	Automatically align milled prosthesis and CAD data.
	Align Selected Areas	Perform alignment of the milled prosthesis and CAD data only within a selected area.
	Detach Data	Detach the aligned data and bring it to the original position.

Crown Fitting Test/Deviation Display

	Reassign Data	Change the assignment for prepared teeth, CAD, and milled prosthesis data.
	Color Map On/Off	Turn the Color Map on and off.
	Delete Measurement Results	Delete deviation measurement results by clicking on each of them.
	Create Sections	Create section lines.

Data Transformation

Scale

Set values for the X, Y, or Z axes to scale data.

Measurements

	Create Sections	Create section lines.
	View Perpendicularly to Section Line	Orient the view perpendicularly to the section line.
	Measure Distance by One Point	Measure the shortest distance to the adjacent 3D data or line.
	Measure Distance by Two Points	Measure the distance between two points.
	Measure Distance by Three Points	Measure the distance between a point and the line defined by another two points.
	Measure Length by One Point	Measure the length of the section line by one point.
	Measure Length by Two Points	Measure the length of a segment by two points.
	Measure Angle by Three Points	Measure the angle between the lines made with three points.
	Measure Angle by Four Points	Measure the angle between the lines made with four points.
	Calculate Area by One Point	Calculate the area of the section line by one point.
	Calculate Area by Two Points	Calculate the area of the segment by two points.
	Calculate Area by Selection	Calculate the selected area.
	Delete Measurement Results	Delete measurement results and section lines by clicking on each of them.

Side Toolbar

The Side Toolbar provides data visualization and control tools that can be used across all workflow steps.

	Data Display Mode	Change between different data display options.(Textured/Textured with Edges/Monochrome/Monochrome with Edges/Wire-Frame)
	+Z Axis	View See the front view.
	-Z Axis	View See the back view.
	-X Axis	View See the left view.
	+X Axis	View See the right view.
	+Y Axis	View See the top view.
	-Y Axis	View See the bottom view.
	Rotate	Rotate data by click-and-drag.

View Cube

The View Cube shows the 3D view orientation; it rotates simultaneously with the 3D data to help understand data positioning within a three-dimensional space. You can click on the visible faces of the cube to rotate data and see it from a specific viewpoint.