📖 User Interface

Overview

Title Bar

The title bar includes the menu, capture options, and tools to resize the program window.

	Menu	Provide basic program functions such as Settings, User Guide, and About.
	Submit Support Request	Land on a Medit Help Center page to submit a support request.
	Select Video Record Area	Select which area of the screen to record the video. The user can record the entire window of the program or only the area where 3D data is displayed.
	Start/Stop Video Recording	Start or stop video capturing. The captured video file can assist in communication between the patient, clinic, and laboratory.
	Screenshot	Capture the entire screen or only the 3D data display area of the scanning software. The captured image file can assist in communication between the patient, clinic, and laboratory.

Clicking the Menu icon will show the following three options.

	Settings	Set scan and calibration options for both table top and intraoral scanners.
	User Guide	Open the user guide.
	About	Provide detailed information about the software program and version.

Guide Message

You can expand or collapse the Guide Message panel on the left side of the screen.

• Expanded

• Collapsed

Scanner Status

Following are the indications of scanner status:

	Not Connected	A scanner is not connected.
	Ready	A scanner is ready for use.

Side Toolbar

	Pan		Move the model.
	Rotate		Rotate the model.
	Zoom In/Out		Zoom in and out on the model.
	Zoom Fit		Position the model in the center of the screen.
	Data Display Mode	Matte	See the data in color with matte finish (Phong rendering).
		Monochrome	See the data in one color.
		Reliability Map	Apply red, yellow, and green colors to the model to indicate the reliability of scan data. * Green data indicates high reliability, while red indicates poor reliability. You can perform additional scanning to reduce unreliable areas.
	Grid Settings (mm)	Grid On	Shows the grid in the background.
		Grid Off	Hide the grid in the background.
		Overlay On	Overlay the grid over the model.