Medit Temporaries creates restorations quickly and easily using pre-set parameters. To change any of the default values, go to settings in the program menu in the top left corner.
Here is a list of available settings in the prepared data module.
General
| Settings | Description | Default | Range |
| Send Anonymous Usage Statistics | Set whether to send anonymous usage statistics to Medit. | On | |
| Advanced Rendering | Displays the 3D model in a more vivid and realistic way. | On |
Outer Surface - Default Settings
| Parameter | Description | Default | Range |
| Distance to Antagonists | The distance from the restoration to its antagonists. All overlapping areas will be removed. | 0.2 mm | 0 mm – 0.5 mm |
| Distance to Adjacents | The distance from the restoration to its adjacent teeth. All overlapping areas will be removed. | 0 mm | -0.5 mm – 0 mm |
| Min. Cross-Section Area of the Connectors (bridges only) | Set the minimal value for the cross-sectional area of the connectors. Values are set separately for bridges with anterior and posterior teeth. | ||
| Anterior | 9.0 mm² | 6 mm² - 15 mm² | |
| Posterior | 14.0 mm² | 10 mm² - 15 mm² |
Inner Surface - Default Settings
| Parameter | Description | Default | Range |
| Minimum Thickness | Set the minimum thickness of the restoration. | 0.5 mm | 0.3mm – 0.7 mm |
| Cement Thickness | The thickness of the cement layer over the prepared tooth. | 0.1 mm | 0 mm – 0.2 mm |
| Cement Starting Point | The point, counted from the margin line, from which cement will be applied to the prepared tooth. | 2 | 1- 5 |
| Smoothing | Choose how smooth you would like the inner surface to be. 💡Note that generally, this depends on your 3D printer or milling machine. We recommend making the surface smoother by default, especially when using milling machines. |
1 | 1 - 5 |
| Remove Undercuts | Automatically removed undercuts. | On |