📖 How to Design Restorations Using Prepared Data > Settings in Prepared Module – Medit Help Center

Settings in Prepared Module

Medit Temporaries creates restorations quickly and easily using pre-set parameters. To change any of the default values, go to settings in the program menu in the top left corner.

Here is a list of available settings in the prepared data module.

General

Settings	Description	Default	Range
Send Anonymous Usage Statistics	Set whether to send anonymous usage statistics to Medit.	On
Advanced Rendering	Displays the 3D model in a more vivid and realistic way.	On

Outer Surface – Default settings

Parameter	Description	Default	Range
Distance to Antagonists	The distance from the restoration to its antagonists. All overlapping areas will be removed.	0.2 mm	0 mm ~ 0.5 mm
Distance to Adjacents	The distance from the restoration to its adjacents. All overlapping areas will be removed.	0 mm	-0.5 mm ~ 0 mm
Min. Cross-Section Area of the Connectors (bridges only)	Set the minimal value for the cross-sectional area of the connectors. Values are set separately for bridges with anterior and posterior teeth.
Anterior		9 mm²	6 mm² ~ 15 mm²
Posterior		14 mm²	10 mm² ~ 30 mm²

Inner Surface - Default Settings

Parameter	Description	Default	Range
Minimum Thickness	Set the minimum thickness of the restoration.	0.5 mm	0.3 mm ~ 0.7 mm
Cement Thickness	The thickness of the cement layer over the prepared tooth.	0.1 mm	0 mm ~ 0.2 mm
Cement Starting Point	The point, counted from the margin line, from which cement will be applied to the prepared tooth.	2	1 ~ 5
Smoothing	Choose how smooth you would like the inner surface to be. Note that generally, this depends on your 3D printer or milling machine. We recommend making the surface smoother by default, especially when using milling machines.	1	1 ~ 5
Remove Undercuts	Automatically removed undercuts.	On

Related to

Settings in Prepared Module

Related articles