❏ Intended Use
Medit Calibration Wizard allows you to calibrate your Medit 3D intraoral scanners, thus managing the scanning performance and the reliability of the acquired data.
❏ Compatibility
The Calibration Wizard can be used to calibrate the i500 and i700 intraoral scanners.
❏ System requirements
- Laptop
- CPU: Intel Core i7-10750H or AMD Ryzen 7 4800H/5800H
- RAM: 32 GB
- Graphic: NVIDIA GeForce RTX 1660/2060/3060 Above 6GB (Not supporting Radeon)
- OS: Windows 10 Pro 64-bit
- Desktop
- CPU: Intel Core i7-10700K or AMD Ryzen 7 5800X
- RAM: 32 GB
- Graphic: NVIDIA GeForce RTX 1660/2060/3060 Above 6GB (Not supporting Radeon)
- OS: Windows 10 Pro 64-bit
❏ Installation
Medit Calibration Wizard is automatically installed together with Medit Link.
1. Run "Medit_LinkSetup.exe."
2. Choose a language for installation.
3. Select the folder for the installation of Medit Link. Read "License Terms and Conditions" carefully, and check the box stating, "I agree to the License Terms & Conditions." Then, click the "Install" button to proceed with the installation.
4. Installation will not proceed if a scanner is connected to the computer.
5. Make sure the cable is disconnected from the computer before proceeding to the next step.
6. The installation will keep going on its own from here, which could take a few minutes.
7. Do not turn off the computer until the installation is complete.
8. After the installation is complete, restart the computer to use the Medit Calibration Wizard from Medit Link.
💡 The scanner may not work without restarting the computer.