Pre-Operation For Maxilla
- acquires 3D images from the preoperative maxilla.
- The preoperative scan data of the maxilla can be used to compare with the postoperative scan data.
❏ Related contents
❏ Command options
Start scan
- starts the scan process.
- Alternatively, you can use the function button on the device.
Stop scan
- stops the scan process.
- Alternatively, you can use the function button on the device.
Optimize
- aligns the acquired 3D scan data.
- The optimization process removes all noisy data from the acquired scan data.
Impression scan
- acquires scan data from the impression model and simultaneously aligns it with intraoral scan data.
High resolution scan
- acquires high-resolution 3D images from the whole or partial scan area.
- High-resolution and standard-resolution images are combined during the post-processing.
Delete
- deletes all scan data acquired in or related to the current stage.
Undo
- Undo the previous action.
Redo
- Restores any actions that have been previously undone by undo.
Smart color filtering
- You can register and manage up to 3 colors to be filtered out while scanning in order not to acquire unnecessary data other than teeth and gingiva.
Metal scan
- If this option is activated and a metal prosthesis is detected while scanning, the scan performance gets optimized for scanning metal prostheses.
Import scan data
- You can import various kinds of scan data (Meditmesh, OBJ, PLY, STL) and perform additional scanning.
Smart scan filtering
- removes unnecessary soft tissues depending on the selected filter.
No filtering: Soft tissue will remain intact. This option is useful when scanning an edentulous case, stone model, or dental model.
Teeth + Gingiva: removes soft tissues that interfere with the scan, leaving only the necessary gingiva. You can use this option for most of general scan cases.
Intense Teeth + Gingiva: Scan data is acquired only from the gingiva within a certain distance from the tooth. By scanning only the area required for patient consultation, unnecessary soft tissue trimming is reduced.
Teeth: removes all other data except for teeth and the least amount of gingiva. This option is effective when you need to perform additional scanning for only the teeth after you scanned the case using the "Teeth + Gingiva" option.