Skip to main content
Deutsch (Deutschland) Español Français (France) Italiano 日本語 한국어 Português Русский 简体中文

[colLab] How do I get the PNL file for my scanner?

Updated

    Question

    How do I get the PNL file for my scanner?

     

    Answer

    [1] Using the serial number of the scanner, you can download the PNL file from colLab version 2.0.0.4 via the calibration wizard.

    • Click the Calibration button.

    Screen_Shot_2019-02-11_at_09.16.49.png

    • Select Barcode and click the Confirm button if you do not have the PNL file. The scanner will scan the barcode and begin downloading the PNL file from the internet. When the download is finished, the scanner will begin the calibration process. To finish the process, make sure your computer is connected to the internet.

    Screen_Shot_2019-02-11_at_09.15.10.png

    • If your scanner is older than the T-series, select Input the number and enter the serial number found at the bottom of the calibration panel. When you click the Confirm button, the system will begin downloading the corresponding PNL file from the internet. When the download is finished, the system will begin the calibration process automatically. To finish the process, make sure your computer is connected to the internet.

    Screen_Shot_2019-02-11_at_10.59.00.png

    [2] The PNL file can also be downloaded from the following website.

     

     

     

    Related articles