[colLab] Setting up the scanner

 Ensure to restart the PC after installing the colLab 2017 program before installing the scanner device.

⚠️ Caution

• Make sure to connect the USB cable and the power cable securely.
• The system should be connected via a USB 3.0 connection.

1. Connect the power cable to the power port.

2. Connect the USB cable to a USB 3.0 port on your computer.

3. Turn on the scanner. The power switch is on the back panel.

4. Make sure that the computer recognizes the scanner.

• Navigate to Device Manager and check if two scanner cameras are recognized.