[colLab] UI overview

(1) Menu

• New project: creates a new job
• Load: loads an existing file.
• Import: imports a [.dentalproject] type file.
• Scan: starts scan.

 

(2) Project type

• Standard: scanning without using the multi-die.
• Multi-die: scanning a model using the multi-die.
• Flexible Multi-die: scanning with the flexible multi-die.
• Orthodontic: scanning an orthodontic model.
• Replica denture: acquiring the inner and outer surface of a denture for replication.

 

(3) Job setup

❏ Select tooth type > Anatomic

• Anatomic crown: a full contour crown.
• Pressed crown: a two-part restoration, in which an anatomic coping is the base layer(framework) and the second part of which gives final form to a restoration.
• Provisional crown: a temporary crown that has preoperative tooth as the outer shape and provisional shape as the inner shape.
• Preform crown: setup for the use of non-standard milling blanks which provides quick milling times.
• Anatomic pontic: a full contour pontic. Pontics are automatically connected to adjacent restorations of the same material.
• Pressed pontic: a two-part pontic consisting of a framework and full contour over-press part.
• Provisional pontic: a pontic connected to a provisional crown.
• Anatomic waxup: a full contour crown created from a full anatomic wax model over a prep.
• Pontic waxup: a full contour pontic obtained from an anatomic waxup over a missing or extracted tooth.
• Inlay/Onlay: an inlay or onlay with full anatomy.
• Veneer: a veneer restoration over a prepped tooth.

❏ Select tooth type > Frame

• Coping: a coping obtained from a full anatomic shape and applied with cutback for porcelain.
• Offset coping: a simple coping with a fixed thickness.
• Reduced pontic: a pontic obtained from a full anatomic shape and applied with cutback for porcelain.
• Reduced waxup: a framework obtained from an anatomic wax model a with cutback for porcelain.
• Offset inlay: a framework for an inlay with a fixed thickness.

❏ Select tooth type > Basic structure

• Bar pillar: the part of a bar which the abutment or implants are connected to.
• Bar segment: bars connecting the pillars.
• Attachment: a retention device for a removable denture.
• Telescopic crown: the inner copping that allows a tilted tooth to fit into the outer crown.

❏ Select tooth type > Bite splint

• Bite splint: a device to correct bites (e.g. custom night-guards, sports-guards)
• Bite splint (missing): a missing tooth part of a bite splint.
• Full denture: a denture device for an edentulous case.

❏ Select tooth type > Etc.

• Antagonist: the tooth in the opposite arch against which a restoration occludes.
• Adjacent tooth: teeth that are next to a restoration in the same arch.
• Missing tooth: teeth that are no longer existing and that need to be denoted when creating a bridge.

❏ Select tooth type > Implant type

• None: implants not required.
• Custom abutment: A custom abutment will be used.
• Custom abutment manual positioning: A custom abutment will be used and manually positioned.
• Screw-retained: A screw-retained construction will be used.
• Screw-retained manual positioning: A screw-retained construction will be used and manually positioned.

❏ Select tooth type > Pre-op scan

• Pre-op scan: The preoperative model is available for a case.

❏ Select tooth type > Gingiva scan

• Gingiva: scans the gingiva separately.

❏ Option > Articulator type

• None: antagonist setup not required.
• Plate: scan using the articulator plate.
• Etc.: scan using a normal jig without the articulator plate.
• ARTEX: scan using an ARTEX or KAS jig and the articulator plate.
• KaVo: scan using a KaVo or KAS jig and the articulator plate.
• SAM: scan using a SAM or KAS jig and the articulator plate.
• Mark330: scan using a Mark330 jig and the articulator plate.
• A7+: scan using a A7+ jig and the articulator plate.

💡KAS jig's compatible articulators and mounting plates

• Artex: articulator (CR), mounting plate (Amann Girrbach Splitex Counter Plates Classic)
• KaVo: articulator (PROTAR evo 2, 3, 5, 5B, 7, 9), mounting plate (KaVo PROTAR evo control plates)
• SAM: articulator (2P, 2PX, 3), mounting plate (SAM MPS mounting plates)

❏ Notes

• Project ID: Enter the project ID.
• Clinic: Enter the clinic information.
• Patient: Enter patient information.
• Technician: Enter staff information for the current job.
• Memo: for remarks.